FIELDPIECE Expandable Stick Multimeter Kit with 400 A AC Clamp accessoryideal for HVAC & Refrigeration

HS33

The HS33 Multimeter is a great entry level modular multimeter. Like every Fieldpiece meter, it’s packed with the features and functions HVACR technicians need to get the job done. The ergonomic shape fits firmly and naturally in your hand while testing. The magnetic hanger, detachable test leads and alligator clip probe tips, allow you to perform tests hands-free. All Fieldpiece accessory heads slide directly on top of the HS33, so you can test a wider variety of parameters than what’s in a single meter.

The modular expandability of the HS33 ensures you don’t have to buy additional expensive meters to preform additional measurements like air flow, amps, static pressure, vacuum, and many more. There are approximately 15 additional accessory heads to choose from.

Features and capabilities:

• Non-contact voltage alertBuilt-in Volt Stick

• Quick temperature compensation

• High voltage and continuity indicators

• MIN / MAX and Data HOLD

• Silicone leads with detachable probe tips

• 400 Amp AC with included Clamp Accessory

• Manual ranging

• Safe one-handed testing

• Partners with all accessory heads to do more with one meter

• Convenient lead storage

Specifications:

• Display: 3 digit liquid crystal display (LCD) with a maximum reading of 1999

• Overrange: “OL” mark indication

• Auto power off: 60 minutes

• Operating environment: 0 to 50 C at <70% RH

• Storage temperature: -20 to 60 C, 0 to 80% RH with battery removed

• Accuracy: Specifications good in ambient conditions of 23 C 5 C, <75% relative humidity

• Temperature Coefficient: 0.1(specified accuracy) per C 0 to 18 C, (28 to 50 C)

• Power: Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22

• Battery life: 300 hours typical with alkaline

• Safety: UL, CE, Cat III 600 V, UL3111, IEC/EN61010-1, C-Tick certified

• Accessories: One pair test leads, one pair alligator clips, k-type thermocouple (HS33), 9 V battery (installed), and operating instructions

Diode test:

• Test current: 1.0 mA

• Accuracy: (1.5% rdg + 3 dgts)

• Open circuit Volts: 3.0 VDC typical

• Overload protection: 500 VDC or AC rms

Continuity:

• Audible indication: Less than 100

• Response time: 100 ms

• Green LED will be on continuously

• Overload protection: 500 VDC or AC rms

Capacitance:

• Range: 200 F

• Resolution: 0.1 F

• Accuracy: (3% rdg + 5 dgts)

• Overload protection: 500 VDC or AC rms

AC Volts (50500 Hz):

• Ranges: 200 mV, 200 V, 600 V

• Resolution: 0.1 mV

• Accuracy: (1.2% rdg + 3 dgts) (2.0% rdg + 5 dgts) on 600 V range

• Input impedance: 560 k on V input, 10 M on mV input

• Overload protection: 600 VDC or AC rms

• Transient protection: 6 kV for 10 sec

Resistance:

• Ranges: 200 , 20 k

• Resolution: 0.1

• Accuracy: (1.0% rdg + 4 dgts)

• Open circuit volts:-17 VAC typical, (-16 VAC on 200 range)

• Overload protection: 260 VAC rms

Temperature:

• Range: -34 to 93 C

• Resolution: 0.1 C

• Accuracy: -17 C, 0 to 48 C,
  1% -17 C, -20 to 93 C,
  2% -16 C, -34 to -20 C

• Sensor type: K-type thermocouple

• Overload protection: 30 VAC rms

Warranty:

• 1 Year from Date of Purchase (excludes Consumables such as Filters, Gaskets, Leads, Batteries, Fuses, Sensors, Cases, etc)

What’s included:

• The Expandable Manual Ranging Stick Multimeter for HVACR

• 400 Amp AC Clamp AccessoryACH4

• Deluxe Silicone Test LeadsADLS2

• Short Alligator Lead ExtensionsASA2

• Deluxe Meter CaseANC1

• 9-Volt Battery (installed)

• Operators Manual