{“specs”:{“spec”:[{“name”:”MT_AllowRetailStyle”,”value”:”false”},{“name”:”MT_DriveType_Specs”,”value”:”Open End”},{“name”:”MT_FeaturesAndBenefits”,”value”:”Open end set at 60, the other at 15 |Both ends are the same size; therefore one wrench can be used in different directions for better leverage and has four different turning angles per wrench |Excellent on jam nuts, aircraft, and close clearance applications”},{“name”:”MT_HidePrice”,”value”:”false”},{“name”:”MT_OverallLength_in_Specs”,”value”:”7-1/2″”},{“name”:”MT_OverallLength_mm_Specs”,”value”:”190.5mm”},{“name”:”MT_Pims_Description”,”value”:”Angle Wrench 13/16″”},{“name”:”MT_ProductName”,”value”:”Wrench, Angle; Angle Wrench”},{“name”:”MT_Ratcheting_Specs”,”value”:”Non-Ratcheting”},{“name”:”MT_Size_Specs”,”value”:”13/16″”},{“name”:”MT_WrenchLength_Specs”,”value”:”Standard”},{“name”:”MT_WrenchStyle_Specs”,”value”:”Angle”}]},”refiners”:{“refiner”:[{“name”:”Drive Type”,”value”:”Open End”},{“name”:”Overall Length [in]”,”value”:”7-1/2″”},{“name”:”Overall Length [mm]”,”value”:”190.5mm”},{“name”:”Ratcheting”,”value”:”Non-Ratcheting”},{“name”:”Size”,”value”:”13/16″”},{“name”:”Wrench Length”,”value”:”Standard”}]},”featuresandbenefits”:”Open end set at 60, the other at 15 |Both ends are the same size; therefore one wrench can be used in different directions for better leverage and has four different turning angles per wrench |Excellent on jam nuts, aircraft, and close clearance applications”,”schoolnames”:{“value”:null},”contents”:null,”drawings”:null}